Splicing Machine Fiber Optic Fusion Splicer JW4106S Fiber Optic Tool Kit
Product Overview of Fusion Splicer:
JW4106S(AV6481) Optical Fiber Fusion Splicer mainly used for the permanent splice of optical fibers, it is widely applied in fiber communication projects and production test of passive optical devices. The splicer can splice diverse quartz optical fibers with the cladding diameter of 80µm~150µm, for instance, single-mode, multimode, non-zero dispersion, dispersion shifted and bending-loss insensitive fibers. As an instrument integrating optic, mechanical and electrical property, the splicer should be kept clean, and avoid severe vibration or shocks.
Features of Fusion Splicer:
- Touch Screen with 4.3-inch LCD display
- Small and light, easy to carry
- USB and SD card interfaces, U-disk automatic software upgrade
- Built-in modular lithium battery, supports 280 times of splicing and heating cycles.
- Precise fiber core alignment, ultra-low fiber fusion splicing consumption
- 7s fast fusion splicing, 18s highly efficient heating.
- 320 times image magnification, 5mm fusion splicing for fibers of ultra-short cutting length
- 300 groups of fusion splicing modes, 100 groups of heating modes
- 10000 groups of fusion records, 64 images storage
- Ceramic presser foot, precise V-block, 3 in 1 fixture for bare optical fiber, tail optical fiber, jumper wire, covered wire
- Automatic splicing, intelligent pyrocondensation
- Water-resistant, dust-resistant and shock-resistant in design
Advantages:
Small in size and light in weight, the splicer is easy to carry and can be lift by one hand. Dust-resistant, water-resistant meeting IP52 requirements, shock-resistant. Compared with AV6471, our star product, JW4106S lowers the size by 38%, the weight by 52%, the power consumption by 57%, but improves the speed by 60%, the environment adaptability by 80% and the reliability (MTBF) by 200%.
Technology Specifications of Fusion Splicer:
| Model | JW4106S |
| Alignment method | Precise core alignment and cladding alignment |
| Applicable fibers | Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651-653, ITU-TG.655 and ITU-TG.657. |
| Optical fiber diameter | Cladding: 80—150p m, coating layer: 0.1—3mm |
| Cutting length | 5—16mm (coated optical fiber diameter<250p m) 10mm (coated optical fiber diameter: 0.25—3mm) |
| Fusion splicing consum ption (typical value) | O.02dB (SMF) ; O.01dB (MMF) ; O.04dB (DSF) ; |
| Return loss | (NZDSF) Better than 60dB |
| Fusion splicing time | 7s |
| (typical value) |
| Heating time (typical value | 18s |
| Pulling force test | 1.96—2.25N |
| Thermal shrinkage tube | 60mm, 40mm and a series of thermal shrinkage tubes |
| Graphical display | High-performance 4.3 inch LCD |
| Magnification time | 320 times/88 times |
| Fusion splicing record | 10000 groups |
| Battery capacity | IV, 6400mAh, typical value of fusion splicing and thermal cycle is 220 times |
| Battery service life | Cycle charging times reach 300—500, can be replaced by customers |
| Electrode service life | Typical value is 4000 times, can be replaced by customers |
| Construction lighting | Built-in lights with high-brightness and wide lighting area |
| Working environment | Temp:-10~50℃;hum: 0~95%RH height above sea level:0 6000m |
| Operation interfaces | GUI graphical operation interfaces |
| External power | ACIOO 240V, 60Hz, O ISA; DC: DCIO |
| External port | USB SD |
| Dimensions | 120mm (W) x 130mm (H) x 154mm (D) (without rubber anti-vibration pad) |
| Weight | 1.59kg (host engine) , 0.37kg (battery) |
Standard configuration:
| No. | Name | Qty/unit/set |
| 1 | Main engine | 1 |
| 2 | Optical fiber cutter | 1 |
| 3 | Miller clamp | 1 |
| 4 | AC power cord | 1 |
| 5 | AC power adapter | 1 |
| 6 | Spare electrode | 1 |
| 7 | Cooling pallet | 1 |
| 8 | Cleanup set | 1 |
| 9 | User Manual | 1 |
| 10 | Multi-functional carrying case | 1 |
Details of Fusion Splicer:
FAQ:
Q1. Could you offer samples?
Yes, samples are accepted.You need place sample order to us, and we will reduce from bulk order.
Q2. What's the delivery time for sample order?
Normally about 3days after confirmation.
Q3. What's the delivery time for bulk order?
Normally 5-10 days depends on products and order quantities.
Q4. Could you do design for us?
Yes, we provide customized service and can do artworks including printing, logo etc. for you.
Q5. What's the payment terms?
TT, WesternUnion, Escrow(secure payment), Trade assurance, Cash, etc.
Q6. Can I use my own LOGO and design on products?
YES, OEM is welcomed.
Q7. How to send the goods?
Usually deliver by courier, like DHL, UPS, FedEx; also bulk cargo by air & sea.
Q8. Certificates:
ISO9001:2015, CE, China Radio and television equipment network access certification
Q9. Small order available? Order MOQ?
Yes sure, Normally10kms per one specification. For support new customers, we know business always comes from small order.
Q10. Design:
OEM/ODM service available. Cable design and package design also available.
You can share us your requirement.
Product Tags:
|
|
JW4106S AV6481 Fiber Optic Tool Kit FTTH Fiber Optic Fusion Splicer Images
|
